As the end of the season arrives it is time for us to sell on some of our demo fleet. There are a few of these Core 90s. They are all in good condition and have not received heavy abuse. They have been used for teaching only.

They come complete with powerlaminate decks, f2 bindings, ats trucks, white twistar hubs and black t1 tyres. the boards are great for kiting and younger downhill riders.

This is a steal. These decks used to retail at £230. This is Tom Read’s deck till he moved onto the new TK Pro board. It is very well looked after and will gives you a lot of fun. Ideal upgrade for someone on a budget.

2009 MBS Pro 100 ex demo model. It comes complete with reverse cap composite pro 100 deck, black f4 bindings, matrix lite trucks, silver rockstar pro hubs and black t3 tyres.

This is the 2009 model MBS Pro 95. It features the sandwich construction deck, F4 bindings, Matrix Lite trucks, Rockstar Pro hubs and T1 Tyres. This is a full on Pro set up ready to go.

The MBS Atom 85X is the perfect board for entry-level junior riders wanting to experience all aspects of mountainboarding. F1 bindings are perfect for smaller feet. A shorter and narrower deck, coupled with 14.5″ skate trucks and 7″ wheels make this a great junior board. A V brake system gives this board everything it needs to perform while keeping some change in your pocket.

The MBS Atom 95X is the perfect board for entry-level riders wanting to experience all aspects of mountainboarding. Beefy deck, F1 bindings and a completely installed V brake system give this board everything it needs to perform while keeping some change in your pocket. If you’re wanting to get into the sport of mountainboarding at dirt cheap prices without sacrificing quality, this is the board for you. One run and you’re hooked.

We are really supporting mountainboarding with this one. This is a t-shirt with a hands graphic taken from the base of the new MBS Pro 100 – Tom Kirkman board. Thanks again goes to Dan Wilson from Decreate and Remolition who helps put this together. The printing was done by Tom Kirkman and Tuai Lovejoy themselves.

We are really supporting mountainboarding with this one. This is a t-shirt with a hands graphic taken from the base of the new MBS Pro 100 – Tom Kirkman board. Thanks again goes to Dan Wilson from Decreate and Remolition who helps put this together. The printing was done by Tom Kirkman and Tuai Lovejoy themselves.

Some riders wanted their Matrix Lite trucks to be even lighter. Others wanted them to be even stronger. So what did we decide to do? Both. And we even increased turning precision at the same time. The result is the new MBS Matrix Pro channel truck system, the strongest, lightest, and by far the most precise channel truck system ever produced. Building upon MBS’ tried and true spring / egg technology, we upgraded the standard Matrix top truck to a bulletproof CNC 6061-T6 aluminum design that looks almost as good as it rides, and added a little extra spring compression to allow you to go faster and bigger than you’ve ever gone before. If you’re serious about this sport you’ll ride these trucks.

The superb MBS F4 bindings are now even better with the release of the MBS F4 Pros. The addition of aluminium L-brackets offers more stance options and strap adjustment angles with the added security of indestructible aluminium. We’ve also redesigned the internal structure to improve the comfort of the strap perimeter whilst maintaining the core rigidity that gives the F4 such amazing control. Meanwhile, ladder strap tunnels prevent pant-leg hang-ups, two-point ratchet connections eliminate ratchet swivel, and ergonomic compression-molded EVA padding provides the perfect blend of grip, comfort, and precision. And if that isn’t enough, the look of this binding alone is worth the upgrade. To ride them is is to love them. Find out for yourself.

Jereme is back and badder than ever, so it’s fitting that the deck that bears his name be the same. This year, we totally retooled the Pro 95 deck to be reverse cap construction (RCC) and made it a whole inch wider under foot so its more stable on the rails and gives you more control over every move you make. We’ve also upgraded the base to PBT so it slides like a butter while protectig it’s stylin’ new graphics. All this makes Jereme’s new Pro 95 required equipment for anyone wanting to push the limits of freestyle mountainboarding / kiteboarding.

Tom Kirkman has set a new standard in the sport of mountainboarding and MBS is proud to be giving him the technology he needs to push the envelope even further with the release of his own pro model. But it’s not just the name or the stylish graphic (inspired by Tom’s own sketches) that makes this deck so special. We’ve also redesigned the core and lay-up to make this deck stiffer, stronger, and poppier than ever before. We’re really proud of Tom and his new deck. We think you will be too.

Tom Kirkman Pro Model – Built to Toms specifications. Tom is a legend in the world of mountainboarding. From the early days he always stood out of the crowd for his talent and style. His style has strong skateboard influences. He is the one who is going faster than anyone else and jumping higher than everyone else.

One complete wheel including a T3 tyre (black), Twistar hub (white), 8″ tube & stainless bearings. This is the same as the wheels on a MBS Pro 90. Super lightweight and super grippy.

These are wrap around wrist guard half finger glove. Every mountainboarder uses these pretty much but they have become impossible to find so we have developed our own. They have been tested by various riders over the last few months and we are happy with them! They are made to offer protection whilst remaining comfortable and without making your hands too hot.

MBS’ Pro Grab Handle grab handle gives kiters and mountainboarders the most ergonomic product available for doing one-foot and no-foot tricks. Is a 360 varial possible? Buy an MBS Grab Handle and find out. Includes mounting hardware. Mounts directly to all Pro, Comp and Core series decks.

Includes 2 Knee Pads, 2 Elbow Pads and 2 Wrist Guards. Comfortable, durable and affordable!  The MBS Core Pads are aimed at beginners and intermediate riders that want a good a pad at a great price, and with a little extra style thanks to this year’s new pad graphics.  Your body will thank you for it!

Includes 2 Knee Pads, 2 Elbow Pads and 2 Wrist Guards. The MBS Pro Pads are the best option for anyone wanting to push the limits of their riding.  Thanks to their large coverage area, quality materials, and close attention to construction details, these pads will make sure you spend more time riding and less time bandaging.  New improvements include 1200D nylon (upgrade from 600D) for improved durability, contoured 18mm knee pad foam for increased shock absorption and better knee pad centering, new rip-proof stitching design on elbow pad straps, wider elbow padding, and stylin new graphics.

Made from 100% Cotton. Super durable and built to last with double stitching and reinforced front pocket stitching.

• 100% brushed 360gm cotton – very durable
• Cover stitched seams – for toughness and strength
• Ribbed cuff and hem – with stretch for a perfect fit
• Pigment dyed
• Relaxed fit

Made from 100% Cotton. Super durable and built to last with double stitching and reinforced front pocket stitching.

• 100% brushed 360gm cotton – very durable
• Cover stitched seams – for toughness and strength
• Ribbed cuff and hem – with stretch for a perfect fit
• Pigment dyed
• Relaxed fit

Made from 100% Fine Gauge Cotton. Super durable and built to last with double stitching.

• 100% brushed 220gm cotton – very durable
• Cover stitched seams – for toughness and strength
• Relaxed fit

Replacement part for F4 bindings.

An upgrade for F3 bindings. Popular amongst kiteboarders who do not use ratchets.

Replacement ratchet buckles for F4 bindings. Always handy to keep some nearby when out and about.

Adaptor spacers for the RockStar Pro Aluminum Hubs to be used with the V5 brake system. Set of 10

Keep your All Terrain Skate or Vector trucks performing they way they were designed to by replacing old pivot cups with new ones each season. For best results replace bushings at the same time.

The Nylon pivot cups come standard on our Pro trucks. They are more responsive than standard pivot cups.

Bushings are the rubbers that fit inside skate and vector trucks and provide the damping and resistance. With use they wear down and get compacted. A new set of bushings can radically change and revive a set of skate trucks and at £4 a set – it really wont break the bank.

We provide three different levels of stiffness, with white (90A) being the softest, orange (95A) being medium, and red (99A) being hard. We recommend red bushings to those looking for a stiffer ride and more high speed stability. The softer bushings allow for more carving and tighter turns. For best results swap pivot cups at the same time.

Replacement springs for your Matrix and Matrix Lite Channel Trucks. New springs can stiffen up your board and make it turn like it did the day you bought it.

Rubber egg shaped shocks that fit inside the springs on Matrix trucks. They are intended to add stability, and come in three different colours, each offering more or less resistance. Heavier riders should choose harder egg shocks.

Choose Red – For a super-stiff ride, heavier riders, speed and big air.
Choose Orange – For a stiff ride, downhill and big air.
Choose Yellow – For a stiffer ride than springs alone, lighter riders and carving.

Replacement plastic top hanger for Matrix and Matrix Lite Trucks. This is the most common thing to break when you crash into a hard object. Our new blend of composite nylon material is the bomb! Upgrade your top trucks today to experience the stiffest, strongest, and most stylish top trucks MBS has ever produced! Now available in the original black, as well as green, yellow and white.

Weighing in at just over 500g each, the new ATS Pro trucks are the lightest trucks on the market – pure and simple. Thanks to their solid titanium axles they are much stronger than traditional skate style trucks. All that combined with their superior corrosion resistance make it easy to see why the ATS Pro trucks are the ideal choice for freestyle kiters.

MBS’ Vector trucks with patent pending “Twin Pin Channel” truck technology provide the perfect blend between precision, weight, and economy by combining the attributes of the lightweight, easy to adjust, and inexpensive ATS truck with the world renowned precision and stability of the Matrix Channel truck. Added features such as a flat grind surface and the stainless M10 king pin and hardware guarantee that the Vector will be loved by weight-conscious kiteboarders, mountainboarders and skate park riders alike.

The new MBS Vector Pro trucks with titanium axles strike the perfect balance – super light weight but still strong, highly precise but at an affordable price, and very stable but still easily adjustable. These are an evolution of our patent pending twin pin channel truck the Vector.

The rust-proof Ti axles and stainless hardware make this truck perfect for kiters seeking more precision and stability than a traditional skate truck can offer. But at the same time, mountainboarders wanting to shave weight off their channel truck set-ups will love it just the same. And for those riders that do a bit of both, MBS Vector Pro trucks can’t be beat. The Vector Pro truck is very popular amongst our younger team members who need a performance set up that is still light enough for them.

Weight 862g per
Axle Diameter 9.5mm

The MBS Twistar hub is a proprietary (patent pending), hardwareless hub design that assembles in three easy steps, 1 Align, 2 Mate, 3 Twist to lock. The hubs have 10 spokes giving them strength and helping them keep their shape. This extra strengthening plastic is offset by the weight saved by losing the hardware. Fits 8″ tires only. MBS Twistar hubs are available in 5 colours – White, Black, Blue, Green, Red & Yellow

Yellow is new for 2010.

Mountainboarding’s most durable hub. Nylon construction for lightweight strength. Two piece design for easy maintenance. This is the only hub that will take our T2 9″ tyres.

The design of the T3 tyre builds upon the tried and true performance of the T1 by using similar tread elements in new ways. The result is a great new tread with increased durability and multi-terrain functionality. Split Center Bead modeled on traditional T1 bead. This design element combined with a flatter profile puts more rubber on the ground. This increases overall durability as well as traction on pavement. Center Channel helps to channel water in wet conditions. “T” Knobs provide excellent grip in soft terrain such as loose dirt and wet grass, or on harder terrain with low tire pressure. Freeriders and kiteboarders are loving these for their extra grip. Available in Black, Green, Red and Yellow.

MBS’ 9″ custom moulded tread pattern. Designed with freeriding and more rugged terrain in mind. Comes standard on the Comp 95X. Fits MBS Trispoke hubs.

MBS’s 8″ custom moulded tread pattern. Lightweight design with superior traction. Center-line contact to maintain speed. These are the fastest tyres out there. Fits Rockstar Pro, Tri-Spoke and Twistar hubs. Available in Black, Blue, Grey and Red.

The Pro rider’s choice of hub. Extruded from the strongest 6061-T6 aluminum then precision CNC machined, these hubs are a thing of beauty ready to take the hardest abuse. MBS has taken the original Rockstar design to the next level. The Rockstar Pro hub set is now available in the original Silver, as well as Black and Gold.

If you intend to use these hubs with the V5 Brake system you will need to order the Rockstar Pro Brake Spacers.

Bearings are one of the consumables that just need replacing from time to time. Kiteboarders flying on the beach will probably need to replace bearings more often due to the increased wear and tear caused by salt and sand.

Stainless bearings offer improved resistance to rust, and tend to last a lot longer. This is mostly an issue for those riding on beaches or nearby them, where there is more salt. These are not available for Atom boards.

The Matrix Lite has been around for a while now and is a must have for any serious mountainboarder. Industry leading design and quality. The Matrix Lite truck delivers the same reliability and performance as the standard Matrix truck for 150g less (weight per board). The Matrix Lite comes stock on the new MBS Pro 100 and Pro 95.

Lightweight, on-the-fly, 4mm hex key adjustment dials the truck suspension to exact tension. Comes complete as shown. You can customise your Matrix Lites with different resistance egg shocks to make it ride exactly the way you like it. You can also customise the colour of your top trucks.

The development of this truck changed mountainboarding forever. For the first time mountainboarders were able to ride with lightweight trucks providing a controlled carving experience and had the luxury of being able to adjust the turning resistance in seconds whilst out riding. You can loosen them up for more technical runs requiring tighter turns, then tighten them up for bombing down hills and big air.

Lightweight, on-the-fly, 4mm hex key adjustment dials the truck suspension to exact tension you require.

It’s always a good idea to have an extra tube to fix an unexpected flat. Always be prepared. Like mountainbiking, punctures do happen and are always a hassle especially when you dont have a spare. The new Twistar hubs make swapping an inner tube whilst out and about a lot faster and easier than ever before too!

MBS FX Pro Heel Straps are the most advanced heel straps on the market. They’re both light and comfortable, but their specialized shape and rigidity prevent them from ever falling down off your heel so you can feel 100% secure in your bindings at all times. And if you want to ride without heel straps for certain tricks or terrain, just flip the FX Pro Heel Straps up over your bindings where they’ll stay until they’re needed again (next trick, next ride, or even next season). FX Pro Heel Straps come stock with Cam-lock Buckles. For riders with F2 bindings or F3 Cam-lock bindings, or for any “adjust-aholics” out there, MBS recommends upgrading to F3 Ratchet buckles. FX Pro Heel Straps are not compatible with F1 or Freeflex bindings.

Our beefed up custom skate truck perfect for lighter mountainboarders and those making their first runs as well as kiters looking for a strong and lightweight truck that wont break the bank. This is our custom designed truck, not a stock truck with extended axles. Lightweight, on-the-fly, skate key adjustment dials the truck suspension to exact tension. Comes complete with mounting hardware and riser pad etc.

n order to make our Atom range as competitive as we can we have designed wheels for the Atoms which are suited to their function and price range. They come as complete wheels.

The Pro 90 deck is truly new and VERY light! With it’s super strong unidirectional carbon-fiber weave actually showing through the bottom graphic, and with it’s highly specialized new perimeter shape, this deck looks as unique and powerful as it performs. Designed with the needs of the MBS Europe Pro Kite Team in mind and tested by them – we have made what we believe to be the ultimate kite deck.

High-level performance at great price. Core decks feature Surlyn bases for excellent durability and slideability, and PowerLam construction with triaxial fiberglass for a fun and forgiving ride.

High-level performance at great price. Core decks feature Surlyn bases for excellent durability and slideability, and PowerLam construction with triaxial fiberglass for a fun and forgiving ride.

PowerLam Composite construction is a time tested construction technique, combined with current composite technology. Powerlam decks consist of a horizontal laminate core made from several wood veneers. Different types of veneers are strategically placed throughout the deck to yield the optimum performance required for that type of deck. Fiberglass is then added to the lay-up to increase the strength to weight ratio. MBS concentrates fiberglass layers as close to the top and bottom layers as possible as this is where the bending stresses are at the highest. Powerlam decks come predrilled for F-series bindings and MBS grab handles.

Powerlam Composite contruction. An awesome universal deck that will perform at any level. Powerlam Construction is a time tested construction technique, combined with current composite technology. Powerlam decks consist of a horizontal core made from several wooded veneers. Different types of veeners are strategically placed throughout the deck to yield the optimum performance required for that type of deck. Fiberglass is then added to the lay-up to increase the strength to weight ratio. MBS Concentrates fiberglass layers as close to the top and bottom layers as possible as this is where the bending stresses are at the highest. Pre-drilled for MBS F-series bindings. Surlyn deck base provides excellent duability and slidability.

A new standard has arrived – the MBS F4 Binding! The F4 binding is similar in concept to the F3, but more evolved. At a first glance the bindings look more sophisticated and the leather finish is much nicer. Smaller details riders will love include the new ladder tunnels that trap excess ladder strap to prevent ladder straps sticking up in the air and the two-point ratchet connections that eliminate ratchet swivel for the most solid binding feel possible. The newly contoured compression-molded EVA underside provides the perfect blend of grip, comfort, and control. We’ve used internal mounting T-nuts to keep the mounting hardware as clean and low profile as possible. The F4 bindings are available in black and white.

Black is SOLD OUT

The all new design MBS F2 bindings are a huge improvement over the original F2 bindings and any other Velcro bindings on the market today. New features include a larger and more ergonomic EVA pad with PE inner structure for added support, full coverage graphic, and two-tone edge taping on all edges to add an extra professional touch to a tried and tested binding design.

The new F2 bindings will be loved by riders of all levels, from budget conscious beginners to advanced kiteboarders that are looking for the lightest, simplest, and most low-profile binding available.

MBS F1 bindings are perfect for those with smaller feet. They provide great grip and contact with the board.

Brake kits are great for singletrack, and steep terrain. Riding with a brake makes learning easier and quicker for beginners and intermediates.

The V3 brake kit is designed for use only with Atom 85. It is also compatible with the old Atom 80.

Brake kits are great for singletrack, and steep terrain. Riding with a brake makes learning easier and quicker for beginners and intermediates.

The V4 brake kit is designed for use only with Atom 95s.

The MBS Atom 85 is the perfect board for entry-level junior riders wanting to experience all aspects of mountainboarding. F1 bindings are perfect for smaller feet. A shorter and narrower deck, coupled with 14.5″ skate trucks and 7″ wheels make this a great junior board. This board has everything it needs to perform while keeping some change in your pocket.

The MBS Atom 90 is the perfect board for entry-level riders wanting to experience the thrill of mountainboarding. Beefy deck, F1 bindings and 15.5″ ATS trucks give this board everything it needs to perform while keeping some change in your pocket. If you’re wanting to get into the sport of mountainboarding at dirt cheap prices without sacrificing quality, this is the board for you. One run and you’re hooked.

The Core 90 is a great board for kiteboarding. It features a short deck together with lightweight All Terrain Skate (ATS) trucks, Twistar hubs and the completely redesigned F2 bindings to create a very light and nimble board perfect for kiting. Young rippers who find the bigger boards too heavy will also love the Core 90. We have done our best to create a lightweight board featuring great components at a good price. The board is fully compatible with other MBS components making it easy to upgrade.

Jereme “Dirty” Leafe Pro model – Jereme is back and badder than ever, and the board that bears his name is the same. To start with, we totally retooled the Pro 95 deck to be reverse cap construction (RCC) and added a whole inch of width under foot so its more stable on the rails and gives you more control over every move you make. We’ve also upgraded the base to PBT so it slides like butter while protecting it’s stylin’ new graphics.

This is the second year for the MBS Pro 90 and it remains as the ultimate production kiteboard. The Pro 90 deck is truly original in terms of shape and construction. The shape allows us to save weight and create a well balanced board. The super strong unidirectional carbon-fibre weave which actually showing through the bottom graphic, and the other layers come together to create a stiff, responsive and extremely poppy deck. The board was designed in conjunction with and to meet the demands of the MBS Europe Pro Kite Team – Lewis Wilby, Mark Berry and Dave Ursell. This year we have added F4 bindings.

The Comp 90 is a great cross over board between the kiting and downhill side of things. It is shorter than most mountainboards making it ideal for smaller riders and kiters. It is considerably lighter than most mountainboards thanks to the Vector (pat pending) truck system. These are a cross between the traditional channel truck and the skate truck making the Comp 90 very versatile. To top it off we have added our brand new for 2009 F4 bindings.

The MBS Comp 95 is a very versatile board suitable for all levels of rider. From the entry level rider who requires a larger and stiffer set up to the weekend warrior who freerides, freestyles and just has a good time. The Comp 95 features all the classic MBS components witih new additions like the Twistar hubs last year and F4 bindings this year. It has been a solid board for many years and one of our most popular boards.

The MBS Atom 85X is the perfect board for entry-level junior riders wanting to experience all aspects of mountainboarding. F1 bindings are perfect for smaller feet. A shorter and narrower deck, coupled with 14.5″ skate trucks and 7″ wheels make this a great junior board. A V brake system gives this board everything it needs to perform while keeping some change in your pocket.

Upgrade your board with stainless steel hardware. Great for riders near the coast where rust can be a problem.

From top hats and springs to deck washers and t-nuts, this kit contains everything needed to maintain a great riding MBS board. Carry it on every ride. Includes carry pouch.

MBS Tri-Pack Pad Set includes 2 Knee Pads, 2 Elbow Pads and 2 Wrist Guards. Comfortable, durable and affordable. This gear, like all MBS products, are made with quality materials and attention to detail.

Comfortable, durable and affordable. This gear, like all MBS products, are made with quality materials and attention to detail.

Small/Medium – suitable for head size 48cm – 53cm
Large/XLarge – suitable for head size 54cm – 58cm

Leashes are required when riding at most centres (unless using heel straps). Coil attachment prevents entanglement while riding.

Everything you could possibly need to service brake kits all put together in a little black box.

Brake kits are great for singletrack, and steep terrain. Riding with a brake makes learning easier and quicker for beginners and intermediates.

All our trucks are brake compatible.

The board tech kit is a small plastic briefcase filled with all kinds of spares you might need.